VIEW-LITE THE HIGH INTENSITY GREEN COLOR FLUROSCENT

X-RAY FILM VIEWER

COLD LAMP, LOW HEAT ON THE WINDOW SURFACE

RUGGED ALUMINUM FRAME WITH ANOIZED

12V HIGH CAPACITY COOLING FAN

CONTINOUS LIGHT INTENSITY CONTROL

OPTIONAL FOOT SWITCH ON/OFF CONTROL

EASY USE AND EASY MAINTENACE

TECHNICAL DESCRIPTION

VIEW-LITE 1417

MAX VIEW DENSITY: 4.0 D

LIGHT INTENSITY: 55,000cd/m²

POWER: 110 OR 220 VAC, 50/60 Hz

LAMP: 10 EA. GREEN COLOR PL-36W LAMP

VIEWER WINDOW:14 INX 17IN ( 356X 432mm )

HOUSING: RUGGED ALUMINUM FRAME

LIGHT INTENSITY CONTROL: FROMnbsp;20%-100% CONTINOUS CONTROL

COOLING FAN: 6 EA. 4INCH SQUARE 12V HIGH CAPACITY COOLING FAN

HEAT ON THE VIEWER WINDOW: LESS THAN 38C AFTER POWER ON AFTER 2HOURS

FOOT SWITCH ON/OFF CONTROL

OUTSIDE DIMENSION:572X542X85 mm(LXWXH)

WEIGHT: 7.5 Kg

Why Use Green Light Lamp

For Wikopedia CANDELA Definition

The frequency chosen is in the visible spectrum near green, corresponding to a wavelength

of about nanometers. The human eye is most sensitive to this frequency, when adapted

for bright conditions. At other frequencies, more radiant intensity is required to achieve the same

luminous intensity, according to the frequency response of the human eye. The luminous intensity for light of a particular wavelength lambda; is given by  where I_v(lambda;) is the luminous intensity in candelas, I(lambda;) is the radiant intensity in W/sr and is the standard luminosity function. If more than one wavelength is present (as is usually the case), one must sum or integrate over the spectrum of wavelengths present to get the total luminous intensity.